Snowmelt system

A snowmelt system is a system that prevents the build-up of snow and ice on sidewalks, roads, or driveways by using warm fluid to melt it. They are designed to function during a storm to improve safety and eliminate winter maintenance labor including shoveling, plowing snow and spreading de-icing salt or traction grit (sand). A snowmelt system may extend the life of the concrete, asphalt or under pavers by eliminating the use of salts or other de-icing chemicals, and physical damage from winter service vehicles. Many systems are fully automatic and require no human input to maintain a snow/ice-free horizontal surface.

Systems are available in three broad types based on the heat source: electric resistance heat, heat from a conventional boiler (or furnace), or geothermal heat hydronically (in a fluid). Arguably, electric snowmelt systems requires less maintenance than hydronic snowmelt systems because there are minimal moving parts and no corroding agents. However, electric snowmelt systems tend to be much more expensive to operate.

Most new snowmelt systems operate in conjunction with an automatic activation device that will turn the system on when it senses precipitation and freezing temperatures, and turn the system off when temperatures are above freezing. These types of devices ensure the system is only active during useful periods and reduce energy waste. A high-limit thermostat further increases efficiency when installed in conjunction with the automatic snow melt controller to temporarily disable the system once the slab/surface has reached a sufficient snow melting temperature. Some building codes require the high-limit thermostat to prevent energy waste. Total environmental impact depends on the energy source used.