Santa Fe 2926

Specifications
Specifications
Configuration:;
• Whyte	4-8-4
• UIC	2′D2′ h2
Gauge	4 ft 8+1⁄2 in (1,435 mm) standard gauge
Leading dia.	42 in (1,067 mm)
Driver dia.	80 in (2,032 mm)
Trailing dia.	50 in (1,270 mm)
Length	120 ft 10 in (36.83 m)
Height	16 ft 0 in (4.88 m)
Axle load	77,500 lb (35,200 kg)
Adhesive weight	293,860 lb (133,290 kg)
Loco weight	510,150 lb (231,400 kg)
Tender weight	464,700 lb (210,800 kg)
Total weight	974,850 lb (442,180 kg)
Fuel type	Oil
Fuel capacity	7,170 US gal (27,100 L; 5,970 imp gal)
Water cap.	24,500 US gal (93,000 L; 20,400 imp gal)
Water consumption	6,000 US gal (23,000 L; 5,000 imp gal) per hour
Firebox:
• Grate area	108 sq ft (10.0 m2)
Boiler	102 in (2,591 mm)
Boiler pressure	300 psi (2.1 MPa)
Cylinders	Two, outside
Cylinder size	28 in × 32 in (711 mm × 813 mm)
Valve gear	Walschaerts

Type and origin
Type and origin
Power type	Steam
Builder	Baldwin Locomotive Works
Serial number	69814
Build date	May 1944

Santa Fe 2926
Santa Fe 2926
	Santa Fe 2926 at the Albuquerque Rail Yards on June 26th, 2024
Power type
Type and origin
Power type	Steam
Builder	Baldwin Locomotive Works
Serial number	69814
Build date	May 1944
Configuration:;
Specifications
Configuration:;
• Whyte	4-8-4
• UIC	2′D2′ h2
Gauge	4 ft 8+1⁄2 in (1,435 mm) standard gauge
Leading dia.	42 in (1,067 mm)
Driver dia.	80 in (2,032 mm)
Trailing dia.	50 in (1,270 mm)
Length	120 ft 10 in (36.83 m)
Height	16 ft 0 in (4.88 m)
Axle load	77,500 lb (35,200 kg)
Adhesive weight	293,860 lb (133,290 kg)
Loco weight	510,150 lb (231,400 kg)
Tender weight	464,700 lb (210,800 kg)
Total weight	974,850 lb (442,180 kg)
Fuel type	Oil
Fuel capacity	7,170 US gal (27,100 L; 5,970 imp gal)
Water cap.	24,500 US gal (93,000 L; 20,400 imp gal)
Water consumption	6,000 US gal (23,000 L; 5,000 imp gal) per hour
Firebox:
• Grate area	108 sq ft (10.0 m2)
Boiler	102 in (2,591 mm)
Boiler pressure	300 psi (2.1 MPa)
Cylinders	Two, outside
Cylinder size	28 in × 32 in (711 mm × 813 mm)
Valve gear	Walschaerts
Maximum speed
Performance figures
Maximum speed	120 mph (190 km/h)
Power output	4,590 hp (3,420 kW) at 40 mph (64 km/h)
Tractive effort	66,000 lbf (293.58 kN)
Factor of adh.	4.45
Operators
Career
Operators	Atchison, Topeka and Santa Fe Railway; New Mexico Heritage Rail;
Class	2900
Number in class	27th of 30
Numbers	ATSF 2926
Locale	Southwestern United States
Retired	December 24, 1953
Preserved	July 1956
Restored	July 24, 2021
Current owner	New Mexico Heritage Rail
Disposition	Operational
	Reference:
	ATSF Locomotive No. 2926
	U.S. National Register of Historic Places
	NM State Register of Cultural Properties
	Albuquerque Historic Landmark
	ATSF; 2926 ATSF; 2926
Location	1833 8th St NW, Albuquerque, New Mexico
Coordinates	35°6′11.8″N 106°39′17.7″W / 35.103278°N 106.654917°W
Area	less than one acre
Built	1944
Architect	Baldwin Locomotive Works
NRHP reference No.	07000388
NMSRCP No.	366
Significant dates
Added to NRHP	October 1, 2007
Designated NMSRCP	February 28, 1975

Atchison, Topeka and Santa Fe 2926 is a 2900 class 4-8-4 "Northern" type steam locomotive, built in May 1944 by the Baldwin Locomotive Works (BLW) for the Atchison, Topeka & Santa Fe Railway (ATSF). It was used to pull passenger and fast freight trains, mostly throughout New Mexico, until retired from service in 1953. In 1956, ATSF donated No. 2926 to the City of Albuquerque, New Mexico for static display.

In 1999, the non-profit New Mexico Steam Locomotive and Railroad Historical Society purchased No. 2926 for restoration. In 2021, No. 2926 moved under its own power for the first time in almost 70 years. It is the world's heaviest 4-8-4, and the sole operating class 2900 locomotive among the last six in existence. The Society, under the trade name New Mexico Heritage Rail, plans to operate historic rail excursion trains behind No. 2926 between Albuquerque and Las Vegas, New Mexico.