New South Wales 43 class locomotive

New South Wales 43 class
No.4306 at the New South Wales Railway Museum, Thirlmere
Type and origin
Power typeDiesel-electric
BuilderA Goninan & Co
Order numberALCO-GE UM118T
Build date1956–1957
Total produced6
Specifications
Configuration:
 • UICCo-Co
Gauge4 ft 8+12 in (1,435 mm) standard gauge
Wheel diameter40 in (1,016 mm)
LengthOver headstocks:
53 ft 10+14 in (16.41 m),
Over coupler pulling faces:
56 ft 8+14 in (17.28 m)
Width9 ft 7 in (2.92 m)
Height13 ft 9+14 in (4.20 m)
Axle load17 long tons 11 cwt (39,300 lb or 17.8 t)
Loco weight105 long tons 10 cwt (236,300 lb or 107.2 t)
Fuel typeDiesel
Fuel capacity1,165 imp gal
(5,300 L; 1,399 US gal)
Lubricant cap.167 imp gal
(760 L; 201 US gal)
Coolant cap.208 imp gal
(950 L; 250 US gal)
Sandbox cap.22 cu ft (0.62 m3)
Prime moverAlco 244
RPM range350–1000
Engine typeFour-stroke, V12 diesel
AspirationTurbocharged
GeneratorGeneral Electric 5GT 581
Traction motorsGeneral Electric 761, 6 of
Cylinders12
Cylinder size9 in × 10.5 in
(229 mm × 267 mm)
Train brakesDynamic
Performance figures
Maximum speed71 mph (114 km/h)
Power outputGross:
1,750 hp (1,300 kW),
For traction:
1,600 hp (1,190 kW)
Tractive effort42,900 lbf (190.83 kN)
at 11 mph (18 km/h)
Career
OperatorsNSW Department of Railways
Number in class6
Numbers4301–4306
First run26 September 1956
Last run2 October 1979
Preserved4306
Disposition1 preserved, 5 scrapped

The 43 class are a class of Australian diesel locomotives built by A Goninan & Co, Broadmeadow for the New South Wales Department of Railways in 1956–1957.