| EMC E1 |
|---|
A 1938 publicity photo of Santa Fe's Golden Gate passenger train pulled by ATSF E1 no. 8, which was used exclusively for Golden Gate service |
| Type and origin |
|---|
| Power type | Diesel-electric |
|---|
| Builder | Electro-Motive Corporation (EMC) |
|---|
| Serial number | 662 (2) 791-797(3-9) 663 (2A) 798-799 (3-4A) |
|---|
| Build date | June 1937–April 1938 |
|---|
| Total produced | 8 A units, 3 B units |
|---|
|
|
| Performance figures |
|---|
| Maximum speed | up to 116 mph (186.6 km/h) |
|---|
| Power output | 1,800 hp (1,300 kW) |
|---|
|
|
The EMC E1 was an early passenger-train diesel locomotive, developing 1,800 horsepower (1,300 kW), with an A1A-A1A wheel arrangement, and manufactured by Electro-Motive Corporation of La Grange, Illinois. They were built during 1937 and 1938 for the Atchison, Topeka and Santa Fe Railway for a new generation of diesel-powered streamlined trains. Eight cab-equipped lead A units and three cabless booster B units were built.
The initial three locomotives were AB pairs built to haul the Santa Fe's Super Chief diesel streamliners, while the others were built as single A units to haul shorter trains. The locomotives were diesel-electrics with two 900 hp (670 kW) Winton 201-A engines each, with each engine driving its own generator to power the traction motors. The E1 was the second model in a long line of passenger diesels of similar design known as EMD E-units. All Winton 201A-engined Santa Fe passenger units, including the E1s, were extensively rebuilt into the 80-class E8M engines in 1952–53. They were similar to production E8 models, but derated to 2,000 hp (1,500 kW) so as not to burn out the early traction (axle) motors, which were reused.